Tau Empire Codex 2013 | Army Builder Program
Dark Angels Codex 2013
Chaos Daemons Codex 2013
Chaos Space Marines Codex 2012

Warhammer 40k Forum Tau Online

 

Warhammer 40K Forum

Painting Guide
Reply
Old 07 Feb 2007, 23:25   #1 (permalink)
Shas'O
 
Join Date: Nov 2005
Location: Maryland, USA
Posts: 5,117
Default Painting Guide

Painting seems so simple, yet I have seen many-a-model that have been ruined by improper use of certain techniques. It seems so simple, and it really can be that simple if you only just do things the right way.
There are 4 main techniques I'm going to cover in this: Applying, Drybrushing, Highlighting, and Shading. First I will do a brief summary of each of them, and then later on I will go more in depth.
Feel free to skip the next few paragraphs if you (think) you know what the 4 techniques are.
Applying the paints is the simplest of them all, to me, but also seems to be the one where most people don't get it right. What I mean by applying the paints is everything from getting the paint onto a pallet, to watering it down, and to painting it onto the model in a smooth and good way.
Drybrushing is another fairly simple technique, that can be done by wiping off most of the paint on your brush and lightly going over areas, where the highest raised parts will receive the most paint and become the brightest. It is best for doing things like hair and skin, but generally I try to not do Drybrushing because it tends to give the model a more dirty and sloppy look.
Highlighting is slightly more advanced than the last two. Basically, it is applying lighter shades of the main color onto to raised surfaces and edges of the armor. Now, you might think that Highlighting and Drybrushing do the same thing - which, generally, they do - but highlighting is a much finer and cleaner way to go about it (if a bit harder and quite more time consuming).
Shading is often the most difficult to do, and isn't always completely necessary if you have a black undercoat and you apply your paints well. However, it is still a nice touch to add, and is usually applying a very watered down paint (ink) onto your model, where the ink will quickly sink into the deeper edges and simulate shadows.

[hr]

Applying Your Paints
Applying your paints well is the single most important thing on your road to miniature painting. If you are unable to apply your paints well, then none of the following, more advanced techniques would work well at all, and the whole mini would end up very bad.
First, and most importantly, water down your paints!!! Oh, so many people think that "No, it's pointless, the more I water down my paints, the more layers I'll have to do! And the more layers, the thicker the paint!" Wrong, wrong, WRONG! If you listen to anything at all I say in this, listen to that. WATER THEM DOWN.
I usually use a ratio of 25:75 Water : Paint, but use what you like the best. Generally, you should apply 3 or more layers of each color. If you only need one or two layers to get a bold color, then your paints are too thick, and you need to water them down more. If you end up doing 6 or more layers then generally your paints are too thin, and you should water them down less*.
"Why should I water down my paints?"
Watering down your paints thins it out, and makes it look a lot less chunky when you apply it to the model. Patience is virtue, and although it takes longer when you do layers (since you should wait for each layer to dry completely before doing another) it is completely worth it.
"I find that when I water my paints, it goes into the cracks of my armor. Why?"
You are watering down too much. I'd half the amount of water you're using if this happens to you.
"Even though I water down my paints, a lot of the time the details on my models go away!"
This is because either:
1) You aren't watering down enough. Double the amount of water you're using.
2) You are applying too much paint. You should only use a small amount of paint on your brush at any given time! Do NOT allow paint to get up into the metal part of the brush - this ruins the brush and also is a sign you're using WAY too much paint.

*With brighter colors like white, more layers are needed, and I sometimes find myself doing countless layers before I get a good strong color.


[hr]

Drybrushing
Drybrushing is pretty simple. I use it when I want to quickly paint bumpy areas such as hair, muscle, or chainmail. USE AN OLD BRUSH, since the brush is most likely to be ruined, and also, the more beat up your brush is the better you will be able to get a good look. You do everything normally - water down your paints, get a small amount on your brush, etc. - except, before you apply the paint, wipe your brush off heavily onto a paper towel. Then apply the paint, brushing quickly over the area you want drybrushed. It should pick out the bumps and high surfaces with the lighter colors while leaving the recesses dark.
"When I drybrush, everything gets painted!"
Wipe off your brush more, or else you might as well paint it on normally.
"Oh no! My $20 brush has been ruined by drybrushing!"
As I said before, USE AN OLD BRUSH! If you don't have an old, beat up brush, then get a cheap, $2 one at your local hobby store. Be sure to mess it up a bit (stab it into a wall or something - great stress relief too) before you start drybrushing.

[hr]

Highlighting
This is where it gets fun. Highlighting is picking out the raised edges of a miniature and painting them a lighter color. Unlike drybrushing, highlighting is usually applied around the edges of flat surfaces, like on a plate of armor. Every single model should be highlighted - there is always something to highlight - be it a gun, piece of armor, helmet, or what-not.
Most people highlight like this:
1) Add some white to the main color
2) Apply it to the edges.
Sure, this does the trick, but it's not good enough. If you really are short on time, then do that, but if you want your mini to turn out well, consider the following:
Hold your mini under a lamp positioned where you want the light source to be coming from. Note how the light is displayed across the miniature, and where the most light is collected.
1) Add some bleached bone to the base color. I usually use about 2:1, Main color : bleached bone.
2) Apply this graciously onto all of the edges and corners of the model.
3) Add some more bleached bone to your mix. I usually do another 2:1, Mix : bleached bone.
4) Apply this in a finer line across the edges, and only onto some edges and corners (remember the light thing? Only apply it to places where the light hit it pretty brightly)
5) Add some more bleached bone - I usually either do 1:1 Mix : Bleached Bone or straight bleached bone.
6) Apply this only to the center of your highlights, in a very fine line.
This should give you good looking and smooth highlights. I use bleached bone instead of skull white to lighten my color because I have found that skull white distorts the color terribly. This can still be done with skull white, but I recommend bleached bone.

[hr]

Shading
Last, but not least, comes shading. Shading is applying darker colors into the recesses of your model to simulate shadows. Most people shade by using inks - paint with a lot of water added to it. You can buy inks individually, or make them, by adding about 10:1 Water : Paint. With your ink, lightly go over the model. The ink should travel to the recesses and color those. Simple as that - effective shading in a heartbeat.
Another thing you might consider is the small cracks between armor joints. Inks work with these too, but can look rather sloppy. What I prefer to do is take a toothpick (or very fine brush) and go over these cracks with black, creating an easy and effective shading effect.

[hr]

Well, I hope you enjoyed reading this and that this helped your painting somewhat! Here's a brief summary:


Drybrushing was probably used in order to get the dirt and grime on their clothes - see how it creates a messy, splatter effect?



Good luck with your painting!
~1shot1kill
__________________
I laugh at the fools who thought Tau Online Chat Op is hard work! :shifty:
[center]
Fire_Warrior 032 is offline   Reply With Quote
Old 08 Feb 2007, 00:47   #2 (permalink)
Shas'Vre
 
Join Date: Mar 2006
Location: Pittsburgh Pa, USA
Posts: 1,822
Send a message via AIM to faol Send a message via Yahoo to faol
Default Re: Painting Guide

Yes this should be stickied great tutorial for the beginners and a wonderfully excellent reminder for all painters new or veteran.

Good writing

Please give the guy some karma well deserved 8) ;D
__________________
Quote:
Originally Posted by Raksha
:P Captain Obvious strikes again!
recruit gladiators
faol is offline   Reply With Quote
Old 08 Feb 2007, 00:53   #3 (permalink)
Shas'Ui
 
Join Date: Sep 2006
Posts: 620
Default Re: Painting Guide

I second the stickageness, and the giving of a karma point.
__________________
Quote:
Originally Posted by Circus
Dogs think they're human. Cats think they're God.
ChiliFriez is offline   Reply With Quote
Old 08 Feb 2007, 01:04   #4 (permalink)
Shas'Saal
 
Join Date: Dec 2006
Location: SASKATCHEWAN, CANADA
Posts: 191
Send a message via MSN to rtjones
Default Re: Painting Guide

got any tips for flat colour painting?
rtjones is offline   Reply With Quote
Old 08 Feb 2007, 01:20   #5 (permalink)
Shas'O
 
Join Date: Nov 2005
Location: Maryland, USA
Posts: 5,117
Default Re: Painting Guide

What do you mean by flat color painting?
For painting flat surfaces? Just highlight it...there's not much to say. Unless you mean something else.

Thanks for the comments!
__________________
I laugh at the fools who thought Tau Online Chat Op is hard work! :shifty:
[center]
Fire_Warrior 032 is offline   Reply With Quote
Old 08 Feb 2007, 01:22   #6 (permalink)
Shas'Saal
 
Join Date: Dec 2006
Location: SASKATCHEWAN, CANADA
Posts: 191
Send a message via MSN to rtjones
Default Re: Painting Guide

Quote:
Originally Posted by The Muffinator (1shot1kill)
What do you mean by flat color painting?
For painting flat surfaces? Just highlight it...there's not much to say.

Thanks for the comments!
no i mean painting areas with just a layer of paint to highlight ot shadings (flat painting).
rtjones is offline   Reply With Quote
Old 08 Feb 2007, 02:42   #7 (permalink)
Shas'O
 
Join Date: Nov 2005
Location: Maryland, USA
Posts: 5,117
Default Re: Painting Guide

Well, I'm not sure if I understand what you mean :-\
Umm...all you have to do is follow the applying part of the guide. Water down your paints a little, and paint them on...
Do you mean painting an area with only 1 layer of paint? I'd strongly discourage that, but you'd do it by not thinning your paint out at all...
__________________
I laugh at the fools who thought Tau Online Chat Op is hard work! :shifty:
[center]
Fire_Warrior 032 is offline   Reply With Quote
Old 08 Feb 2007, 14:02   #8 (permalink)
Shas'El
 
Join Date: Dec 2006
Posts: 2,645
Default Re: Painting Guide

Great guide Muffinator. I just picked up a brush 3 months ago and am slowly painting my army so I've been reading as many guides as I can so I can try and get into good habits early and avoid the bad ones.
__________________
Thor{DoH} is offline   Reply With Quote
Old 20 Mar 2007, 05:56   #9 (permalink)
Kroot Warrior
 
Join Date: Mar 2007
Posts: 2
Default Re: Painting Guide

Thank you so much for this! I am new to 40k and the Tau are my first army. This place has been a spectacular resource and this tutorial has helped my painting immensely!
__________________
"In times of universal deceit, telling the truth can become a revolutionary act." - Orwell
LoBall is offline   Reply With Quote
Old 20 Mar 2007, 08:37   #10 (permalink)
Shas'El
 
Join Date: Sep 2006
Posts: 3,744
Default Re: Painting Guide

Great work, Muffinator. I hope you get some pictures up soon because I think that will really help to show new painters what these techniques look like when put into practice.

Cadaver is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A guide to 'Tabletop Quality' painting. Wargamer Painting 9 24 Apr 2009 10:57
Advanced Painting Guide (has better pictures) Fire_Warrior 032 Painting 11 10 Jul 2007 01:02
Best painting guide I have ever seen!!! laxlover_bill369 Painting 5 02 Jul 2007 04:32
guide to painting alpha legion? Jeff Forces of Chaos 7 22 Apr 2005 05:05